Panels-Moldings-Scuff Plates, Pillar, Cowl, 1/4 Panel Trim and Cargo Covers for 2009 Dodge Sprinter 2500
Screw
[m8x1.25x80.00]. Intermediate Flange to Transmission Case [M8x80]. [M8x1.25x80.0] Timing Cover. M8 x 80. [M 8x80].
Bolt
M8x1.25x35. Injection Pump to Crankcase. M8x35. Tensioner Attaching. Pump and bracket to engine. [m8 x 35]. Cylinder Head Two In Right One In Left. Compressor Bracket to Block. Engine Lift Bracket.
Washer
Shock Absorber on Water Pump. Bracket to Fire Wall. Bracket to Firewall. Condenser to Support 8MM. Condenser Mounting.
Mounting to Longitudinal Member Bottom M6x16. Lid Lock. Mounting to Longitundinal Member Bottom M6x16. [M6x10].
With [CXQ and GKE and [MWJ and or MX2 and or MX1].
C Pillar Molding, Pillar, Lower, Right
Right & Left.
Auxiliary Stop Lamp to Body. Panelling to Instrument Panel. Tail Lamp to Body.
Tapping Screw, Right & Left
[4.8 x 16 mm]. With [rbv or rbe]. [4.8x16]. [M4.8x1.6x16.00].
Nut
M6x1.00. Throttle Body Shield to Intake Manifold. Heater return tube to engine. Rod to Lever Assembly. Engine Oil Level Indicator Tube. Accelerator Pedal Assembly to Dash Panel. M6. Quantity Of 4 Is Needed. Parking Brake Cable Guide to Floor Pan.
Sensor to quarter panel. Reservoir to Support. Front Fender to BSA. Paneling Rear Top. Grab Handle Attachment. With [GKE and CS1].
M4.8x1.6x19.0. License lamp to fascia. Door Trim Attaching. Pull Cup Attaching. Pull Cup To Trim Panel. Fog lamp attaching.
Auxiliary Stop Lamp to Body. Panelling to Instrument Panel. Tail Lamp to Body.
M4.8x1.6x19.0. License lamp to fascia. Door Trim Attaching. Pull Cup Attaching. Pull Cup To Trim Panel. Fog lamp attaching.
Auxiliary Stop Lamp to Body. Panelling to Instrument Panel. Tail Lamp to Body.
Tapping Screw, Right And Left
[4.8 x 16 mm]. With [rbv or rbe]. [4.8x16]. [M4.8x1.6x16.00].
M4.8x1.6x19.0. License lamp to fascia. Door Trim Attaching. Pull Cup Attaching. Pull Cup To Trim Panel. Fog lamp attaching.
Washer
Shock Absorber on Water Pump. Bracket to Fire Wall. Bracket to Firewall. Condenser to Support 8MM. Condenser Mounting.
With [CWC and or XJW and or XJ1] and [CTA and or CTA and GK9].