Manifolds and Vacuum Fittings for 2009 Dodge Journey
Inclues Items In The Box. Includes Items 2,3,4,5,6,7,8,9,10,11,12,13,14.
[m5.74x1.81x49]. M6x1.00x40.00. Throttle Body To Plenum. Actuator Attaching. Manifold Tuning Valve. [M5.7x1.8x49.0]. Throttle body to intake manifold.
Throttle Body To Intake Plenum. Intake Manifold To Throttle Body Bracket. M6x1.00x18.00. [m5.74x1.81/m6x1.0x78.5]. Intake Manifold To Electronic Throttle Control Bracket.
Upper Intake Plenum To Lower Intake. Plenum To Lower Intake Manifold. Upper Intake Manifold To Lower. Upper Intake Plnum To Lower Intake. [m6x1.00x140.00].
[m5.74x1.81x21.5]. Heat Shield To Exhaust Manifold. M6x1.00x17.00. Manifold Tuning Valve To Intake. Acuator To Intake Manifold. Actuator to Manifold.
M6x1.00. Throttle Body Shield to Intake Manifold. Heater return tube to engine. Rod to Lever Assembly. Engine Oil Level Indicator Tube. Accelerator Pedal Assembly to Dash Panel. M6. Quantity Of 4 Is Needed. Parking Brake Cable Guide to Floor Pan.
Hex Head Bolt And Washer, Mounting
ENG SUPT INSUL BRKT LT
Hex Head Bolt And Washer, Mounting
Bearing Block Support Bracket Mounting. Intake Manifold Strut Bracket. Support Bracket To Cylinder Head. M10x1.5x25. M10x1.50x25.00. Intermediate Shaft Bracket to Block. Alternator adjuster bracket. P/S Strut to Block. EGR Bracket to CYL Head. Power Steering Strut to Block.
THIS PART IS CURRENTLY ON BACK-ORDER FROM THE MANUFACTURER AND IS NOT AVAILABLE AT THIS TIME.
Hex Flange Head Bolt, Mounting
M8x1.25x30.00. Oil Filter Adapter To Cylinder Block. Bracket to Block. Tensioner to Accessory Drive Bracket. Timing Chain Cover To Engine Block. Tensioner attaching. Oil Filter Adapter To Oi Pan. Bracket attaching. A/c discharge jumper to condenser. [m8x1.25x30.0].
Timing Chain Cover To Cylinder Block. M8x1.25x55.00. Exhaust Manifold To Crossunder Pipe. Crossunder Pipe To Front Manifold. Crossunder Pipe To Front Maniveter. Y pipe to converter. Crossunder Pipe To Rear Converter. Timing Chain Cover To Cylinder Head. Front Maniverter to Y-pipe. Front Exhaust Pipe.
Hex Flange Head Bolt, Mounting
To down Y pipe. Two Hole [One Round Hole One Triangle Hole.
Exhaust And Catalytic Converter Manifold, Right
[naa=na1]. [naa=nam+x87].
Exhaust And Catalytic Converter Manifold, Left
[naa,na1] after 1/02/08. [naa=nam+x87].
Exhaust And Catalytic Converter Manifold, Right
[x87+nae].
Exhaust And Catalytic Converter Manifold, Left
[x87+nae].
Core Plug
[1 1/4``]. Rear Of Lower Intake Manifold. Cylinder Block Main Oil Gallery. Cylinder Block Main Oil Galley 5/8``. Cylinder Block Oil Hole. See Note. Large Bore Tappet. Engine Block Main Oil Gallery. Cylinder Block Oil Gallery 5/8.
Plastic Connector. Includes Thermostat,Seal,Water Inlet Tube and Hose.
Nipple
Y-Style. Also Serviced With Item 1. Water Supply Rear Lower Intake. Also serviced wih Cover. Heater hose fitting. 0.375-18x2.00. Special .375-18x2.00 Heater Hose Supply. Also serviced with Cover.
Sensor to intake manifold. Engine oil temp sensor. Engine coolant temperature. Oil temperature.
Oil Pump Body To Cylinder Block. M8x1.25x55. [m8x1.25x55.00]. Intake Manifold To Cylinder Head. Fuel Rail to Intake Manifold.